I hate having the hoses and shore power cables sitting on the ground. I saw a picture of this on the internet and I thought it was brilliant. I’ve since lost the link of the original, but here’s my version.
To make this work, I combined two really good (but still inexpensive) suction cups and a pair of mommy clips. The hose and cable goes into the hooks and they go on to the suction cups.
I make sure that I have the hose arranged so the hook is taking the weight of the water filter instead of the inlet on the side of the camper.
I use quick releases all around to save a few minutes during setup and teardown.
I’m not particularly paranoid by nature, but the internet can sure make you that way. After reading enough posts about propane tanks being stolen, I decided to do a simple mod to secure the tanks on my 216RBK. I drilled a hole through the giant wing-nut and a matching pair through the security bar that…
Here”s a Graphical Guide To The Enhancements We Made Just rollover the arrows to see the descriptions.We mounted an Amazon Alexa Dot to the sidewall to replace the tinny outdoor speakers.We added a baby-proofing latch to the fridge.We moved the small inside fire extinguisher to the outside kitchen.We replaced the Coleman grill with a two…
I’m old. I lean on things. I happened to lean on the outdoor socket on my 215RBK when I stood up from placing the X-Chocks and it moved. A lot. I realized that they were using the foam on the outlet cover to seal the giant hole in the side of the trailer. And since…
