Not sure if it’s safe to put a screw in the wall? Me either.
However, I was able to grab some photos with dimensions when i was fixing the outdoor outlet. You’ll note that I wasn’t being careful so one of the photos is in inches and the rest are in millimeters. I’ll convert both ways:
The full wall is 1.35″ or 34mm. The inside panel is 2.74mm or .11″. The outside (Azdel) panel is .17″ or 4.39mm. The most important part of this is 1″ screw should be safe to use when you want to hang something on the inside of the trailer.
I had pulled the valences from over the windows and have been reusing them when needed. They’re 1″ so we have that as confirmation.These screws from Amazon match the ones I removed from the valences.
I had this bottle opener for a year before I figured out where to put it. I’m deathly afraid of putting holes in the Azdel walls. I’m probably being wimpy about it but I’m not willing to take a chance. I finally realized that I could mount it with a screw and nut right in…
Here”s a Graphical Guide To The Enhancements We Made Just rollover the arrows to see the descriptions.We mounted an Amazon Alexa Dot to the sidewall to replace the tinny outdoor speakers.We added a baby-proofing latch to the fridge.We moved the small inside fire extinguisher to the outside kitchen.We replaced the Coleman grill with a two…
It’s amazing how many paper towels we go through on a camping trip. We put one of these holders outside and one inside. They have a “clicky” movement so the towel roll doesn’t move unless you really mean it to. This is great for dealing with road vibration. Note: I installed these with the screws…
The 215RBK is my first trailer with a water heater that uses both gas and electric. Its a great feature and it was on my must have. However, once I got the trailer, using it wasn’t as easy as I thought. The instructions are as clear as mud! I read a lot of facebook posts…
