I had this bottle opener for a year before I figured out where to put it. I’m deathly afraid of putting holes in the Azdel walls. I’m probably being wimpy about it but I’m not willing to take a chance.
I finally realized that I could mount it with a screw and nut right in to the refrigerator panel right next to the kitchen. Even if I screwed it up, I could always buy a replacement for a few bucks!
I really like the magnet. No one has an excuse for leaving a bottle cap on the ground.
Installation
I didn’t use the stock screws to install it. I wanted to make sure I gave the plastic cover as much help as possible. I pre-drilled the holes and used pan-head stainless steel screws, nuts and washers to mount it. I took the opener to the store to make sure I matched the head to the original screws.
I used Loctite on the threads to make sure they didn’t vibrate out.
Here”s a Graphical Guide To The Enhancements We Made Just rollover the arrows to see the descriptions.We mounted an Amazon Alexa Dot to the sidewall to replace the tinny outdoor speakers.We added a baby-proofing latch to the fridge.We moved the small inside fire extinguisher to the outside kitchen.We replaced the Coleman grill with a two…
Our first trailer was a Jayco Jayfeather Sport 197. It was our introduction to camping but it had some shortcomings. So we sat down and made a list of features we wanted in an upgrade. It was a fairly short list but it took us months to narrow down to the trailer we wanted Our…
We’re really happy with our Coachmen Apex 215RBK but there are a few design flaws. Early this summer we discovered one of the biggest.
Almost no cold air from the AC gets past the entertainment center into the bedroom!!! This made for a very hot night until my wife figured out if we rotated the TV 90 degrees so it sat between our feet then the air could get through. This was a genius work around.
